Construction of Monolithic Steel Tube Greenhouse Shed
2020-03-09 14:08:54
1. Type: Assembled single steel tube greenhouse
2.Specifications: Shed length 30-120 meters, width 4-8 meters, tube spacing 0.8-1.2 meters, top height 2.5-3.6 meters, shoulder height 0.6-2 meters
3, structure:
(1) The arch rods are made of galvanized steel pipes of ∮20 or more and then bent to form a main supporting material for the shed body. The shelf life is 10 years under normal use conditions.
(2) Longitudinal keel rods are also made of galvanized 15 or more hot-dip galvanized tubes, which are used to connect the arch rods and make them a solid overall structure. They are connected to the two side arch rods by special connecting tubes.
(3) The fixing slot of the film is a dedicated 0.7mm slot.
(4) The poles at the two ends of the shed body are made of hot-dip galvanized pipe or square pipe. The upper end is fixed with clamps and end face arches, and the lower end is inserted into the mud with the arch pipe about 30 cm.
(5) According to the needs of users, both sides can open the door, push the door or open the door.
(6) Anti-loading capacity The greenhouse has a wind resistance of 25 m/sec and a snow load capacity of 30 kg/m2.
(8) All the above steel materials are in accordance with the national "Code for Design of Steel Structures" (GBJ 17-88) standard. The steel frame structure is made of hot-dip galvanizing treatment. The thickness of the zinc plate is 0.08-0.10mm, and the steel is QA325 standard. .
Everything is assembled, users only need to assemble according to drawings, different regions have different climate design for different regions, special-shaped greenhouse is also targeted design.
Environmentally Straw Cup,Straw Cup,Wheat Straw Cups,Wheat Straw Drink Cups
Yangzhou Tongfun Red International Trading Co,Ltd. , https://www.i-ecbio.com