Precautions for use and maintenance of tofu machine
Tofu machine grinding is a kind of equipment that is fully automatic without manual coordination. The pulp separation system consists of a motor, a separate refiner, and a slurry tank. The heating slurry system is made up of a suction pump, a heated steam package, and a boiled machine. The composition of the pulp barrel, the electrical control panel is composed of a voltmeter, an ammeter and an AC, and the separate switch controls the refiner, the suction pump and the boiling system respectively. The water level of the steam can be observed by a water level gauge, and is equipped with a pneumatic double press forming machine. , pressed into tofu.
Here are some tips for using the tofu machine:
1. The most critical part of the use of the tofu machine is to cook the new bean curd with alkaline water for about 1 hour, otherwise there will be rotten skin or peel off when peeling.
2. When installing, first install the leakage protector on the main power supply, because there is a lot of water flowing in the tofu workshop. If there is leakage, the possibility of electric shock is quite large. A ground wire is installed on the unit, which can provide safety protection.
3. In the production process, if the motor has noise, strange sound, overheating, burnt smell, smoke, etc., the power should be turned off immediately, and the machine should be shut down to ensure safety.
4, install the host, the ground must be level, the front and rear of the fuselage must be kept horizontal, otherwise it will affect the thin and thick quality of tofu.
5, the tofu unit should be placed on the wall of the motor rotating device, so as not to accidentally insert your hand into the wheel, the children are not allowed to enter the work site.
Tofu machine maintenance method:
1. Turn off the power when the machine is stopped.
2. The equipment must be kept clean before and after use.
3. When the equipment is used normally, the water in the boiler should be drained in 3-5 days, and then the water should be injected to maintain the good water in the boiler.
4. When the power supply voltage is lower than 15% of the rated voltage, the use of the equipment will easily cause damage to the accessories.
5. When the machine is used in winter, the water in the boiler should be drained in time to avoid freezing the boiler.
Greenfarm Import And Export Co., Ltd. , http://www.jn-foods.cn