Introduction to the worm wheel crusher handling and attention matters
2021-06-15 11:03:58
1. Before using the worm wheel pulverizer, first check if all the fasteners of the machine are tightened and the belt is tight.
2. The direction of the spindle running must conform to the direction of the arrow shown on the protective cover, otherwise the machine will be damaged and personal injury may result.
3. Check if the appliance is complete.
4. Check whether there are any hard objects such as metal in the crushing room of the machine. Otherwise, the tool will be damaged and the machine will be affected.
5, the material must be checked before the crushing purity, do not allow the metal hard debris mixed in, so as not to damage the tool or cause burning and other accidents.
6. The oil cup on the machine should be filled with lubricating oil to ensure the normal operation of the machine.
7. Stop feeding before stopping. If you do not continue to use, remove the leftovers from the machine.
8. Check the tool and the screen regularly for damage. If it is damaged, replace it immediately.
9. When the machine body is used, there will be slight vibration. Be sure to tighten the cover connecting handle to avoid accidents.
2. The direction of the spindle running must conform to the direction of the arrow shown on the protective cover, otherwise the machine will be damaged and personal injury may result.
3. Check if the appliance is complete.
4. Check whether there are any hard objects such as metal in the crushing room of the machine. Otherwise, the tool will be damaged and the machine will be affected.
5, the material must be checked before the crushing purity, do not allow the metal hard debris mixed in, so as not to damage the tool or cause burning and other accidents.
6. The oil cup on the machine should be filled with lubricating oil to ensure the normal operation of the machine.
7. Stop feeding before stopping. If you do not continue to use, remove the leftovers from the machine.
8. Check the tool and the screen regularly for damage. If it is damaged, replace it immediately.
9. When the machine body is used, there will be slight vibration. Be sure to tighten the cover connecting handle to avoid accidents.
Wuxi ASK Pneumatic Machinery Co.,Ltd , https://www.askpneumtic.com