How to properly operate and maintain the three-in-one filling machine
The flow of the three-in-one filling machine is generally that the incoming empty bottles are stacked on the tray, the tray is conveyed and unloaded, and the removed trays and boxes are sent to the drop conveying machine, and the empty bottles are taken out through the conveyor. The washing machine delivers the box, after washing, and then the packaging on one side of the transporter, so the platter is in the bottle. The empty bottle taken out of the box is used to unload the aircraft, and the other line is bottle-disinfected and cleaned. After passing the inspection standard of the inspection bottle, it enters the filling machine and the capping machine along the cleaning. The filling machine is bottled, and the beverage bottle is sealed by the capping machine to label the shipping labeling machine. After the label is placed, the machine is placed in the warehouse on the tray.
The three-in-one filling machine is suitable for the quantification of powders and small particles in chemical, food, agricultural and sideline products. Nancheng three-in-one filling machine technicians decomposed their product features for microcomputer control and accurate quantification. The parameters can be adjusted to automatically correct the error. Strong and weak electric separation, no interference. High reliability and wide adaptability. For example: pesticides, animal medical products, disinfectants, detergents, food, seeds, milk, seasonings, chemical seasonings, salt, sugar, additives, etc. The filling parts are made of all stainless steel for processing precision, reasonable interchangeability, grading, modular design, and softness.
Use and maintenance of three-in-one filling machine:
1. The three-in-one filling machine is not suitable for metal containers and metal covers. It is not allowed to press the start button on the metal table, otherwise the machine will be damaged.
2. Insert the induction air plug and tighten the screw before turning on the power.
3. Use single-phase three-wire power cord. For operator safety, be sure to use single-phase three-wire power socket. The work floor must be dry to keep insulation.
4, with temperature overheating automatic protection function, when the internal temperature of the machine is overheated, the buzzer sounds in the machine " abnormal protection (PRO. MD.)" yellow indicator light, at this time should turn off the main power switch, standby cooling After the buzzer stops, continue working.
5. During the working process, always touch the surface of the sensor head to check whether it is overheated. If it is found that the hot hand should stop heating, it should work after cooling (cooling can not turn off the power), when the “WARM UP†green indicator light is off, Do not press the start button to avoid false triggering. After the three-in-one filling machine is finished, turn off the power switch on the panel.
6, equipped with a fuse of 5A, not available for greater than 5A insurance instead.
7. There is high voltage inside, the bottom plate is charged, and it is strictly forbidden to repair it personally to avoid personal electric shock.
8. If it is found that there is a bare wire before use, stop using the three-in-one filling machine and use it after repair.
9. The equipment should not be impacted, stressed or damp when transported, stored or used.
Black Garlic Paste is made of Peeled Black Garlic without supplements. The paste appears brown to black and is without any impurities. It has a rich garlic odor and it tastes sour with a hint of sweet.The paste is convenient and very easy to eat. It is usable directly after opening, eaten directly or spreaded on bread slices and biscuits.
Black Garlic Sause(Paste)
Black Garlic Sauce,Black Garlic Paste,Fermented Black Garlic Sauce,Pure Black Garlic Paste
Zhucheng Tongxi Commercial And Trade Co.,Ltd. , http://www.blackgarlicgroup.com