Diesel Fuel Saving Method 9

1. Use a fuel-saving smoke reducer to vertically secure the fuel-saving smoke reducer to the front-end oil passage of the fuel injection pump. Connect it to a DC power supply. The fuel-saving effect is very good. 2. The use of diesel additives to directly add diesel additives to diesel fuel in a prescribed proportion. After mixing and dissolving, they can be used. Generally, about 10% of fuel can be saved. 3, the installation of negative pressure valve on the diesel engine to install the negative pressure valve, can reduce the gas pressure inside the diesel engine crankcase, make it maintain a certain negative pressure, prevent oil from extravasation, reduce oil consumption. 4. The use of a combined piston ring with a combined piston ring can reduce the fuel consumption by 1.2g/(kWh) compared to the conventional ring. 5. Installation of inertial booster The inertial booster installed on the S195 diesel engine can generally increase the power by 7.35%-11.03% and the fuel consumption by 3%-5%. When installing, it should be noted that the inner wall of the air inlet pipe should be clean and smooth, and the joints of the pipe should be padded and sealed. The upper part of the pipe should be supported so that it can be fastened firmly. 6. Wrap the toilet paper on the filter in the diesel and oil filter cartridges. Wrap it in winter for two layers. Pack the toilet paper in four layers in summer to improve the cleanliness of the oil and reduce the oil consumption of the engine oil. 7. Add foam plastic filter In the two-layer wire filter of the air filter, add a layer of foam with good air permeability and thickness of 8-20mm, which can improve the filter effect, ensure the normal combustion of oil and reduce fuel consumption. 8. The reason for the transformation of the oil return pipe to the S195 diesel engine is that the oil pipe is connected to the intake pipe, and the return oil is in a droplet shape, and enters the cylinder with air, reaching 20-59 g/h. Due to poor atomization, waste oil is wasted. The oil return pipe is now connected to the high-pressure oil pump inlet pipe so that the oil can enter the low-pressure oil line, which can maintain normal combustion and save fuel. 9, timely removal of carbon deposition diesel engine in the work, complex polymer will be formed in the valve, valve seat, nozzle and piston top of the coke, increase fuel consumption. If the coke is removed in time, the effect of fuel economy is obvious. China Agricultural Network Editor